Boiler Stoves

Evolution 26

Ash deflector (fits below the lower log retainer) for the Evolution 26 wood burning boiler stove.

Part Code: S-EVO26/GRATESUP/FR

Internal firebricks for the Evolution 26 wood buring boiler stove.

These parts are classed as consumable and will require replacing periodically, if you find you are replacing firebricks more than once a year consider changing stove operation and also get your appliance serviced.

Part Code: S-EVO26/VERM/BOT/SIDE

Internal firebricks for the Evolution 26 woodburning boiler stove.

These parts are classed as consumable and will require replacing periodically, if you find you are replacing firebricks more than once a year consider changing stove operation and also get your appliance serviced.

Part Code: S-EVO26/VERM/SIDE/FR

Internal firebricks for the Evolution 26 woodburning boiler stove.

These parts are classed as consumable and will require replacing periodically, if you find you are replacing firebricks more than once a year consider changing stove operation and also get your appliance serviced.

Part Code: S-EVO26/VERM/BOT/REAR

Internal firebricks for the Evolution 26 woodburning boiler stove.

These parts are classed as consumable and will require replacing periodically, if you find you are replacing firebricks more than once a year consider changing stove operation and also get your appliance serviced.

Part Code: S-EVO26/VERM/REAR

Internal firebricks for the Evolution 26 woodburning boiler stove.

These parts are classed as consumable and will require replacing periodically, if you find you are replacing firebricks more than once a year consider changing stove operation and also get your appliance serviced.

Part Code: S-EVO26/VERM/SIDE/REAR

Heat resistent glass for the Evolution 26 wood burning boiler stove.

Part Code: S-EVO/GLASS/GRANDE

Grate x4 to suit the Evolution 26 wood burning stove.

Part Code: S-EVO/GRATE

Handle for the Evolution 26 woodburning boiler stove.

Part Code: S-EVO/HANDLE

Lower part of the log retainer for the Evolution 26 wood burning stove.

Part Code: S-EVO26/LOGRET/BOT

Spigot (or flue collar) for the Evolution 26 wood burning boiler stove.

Part Code: S-EVO/SPIGOT

The thermostat consists of an arm and sealing pad, this automatically opens and closes to regulate the combustion air entering the appliance. The initial starting position of the arm (desired combustion level) is set by rotating the control knob at the front of the stove. The control knob connects to the thermostat via a flexi drive cable, should you need to replace this drive cable it is our part code: T-THERM/FLEXI/SAG.

Part Code: T-THERMOSTAT

This is the small control knob located below the ash lip of the stove, by turning this control you set the starting position for the thermostat (initial combustion level before it starts automatically opening and closing to regulate the combustion air). This control is held in place with a spring clip, should you need to replace the spring clip our product code is S-EVO26/KNOB/SPRING.

Part Code: S-EVO26/KNOB

Hercules 20

Steel baffle for Hercules boiler stoves. This part sits just below the lid of the stove behind the large horizontal tube. When discussing please specify your stove version.

Part Code 12B: S-HERC12B/BAF

Part Code 20B: S-HERC20B/BAF

Part Code 30b: S-HERC30B/BAF

Ceramic heat proof glass capable of withstanding temperatures up to 800°C. Over the years the glass has gone through several dimensional changes so please check your sizes and relevent part code before ordering.

Part Codes

185mm x 250mm: S-HERC/GLASS
187mm x 253mm: S-HERC/GLASS/D
192mm x 257mm: S-HERC/GLASS/W

Cast iron grate set for the Hercules stoves, these grates are supplied in two peices (left and right). When discussing please specify your stove version e.g. 12, 20 or 30.

Part Code 12BW – W585mm x D244mm: S-HERC12GRATE

Part Code 20B – W585mm x D314mm: S-HERC20GRATE

Part Code 30BW – W590mm x D396mm: S-HERC30GRATE

Handle for the Hercules 20 / 30 stove.

Part Code: S-HERC/HANDLE

Lid casting for the Hercules boiler stoves, please specify your version

Part Code 12B: S-HERC12/LID

Part Code 20B: S-HERC20/LID

Part Code 30B: S-HERC30/LID

Flue pipe reducer ring for the Hercules boiler stoves. This item sits into the lid and allows you to use 7″ flue rather than 8″.

Part Code: S-HERC/RED

Tertiary air tube for the Hercules boiler stoves. This is the perforated stainless tube which sits at the rear of the firebox, air enters the tube through the flap on the right hand side of the stove.

Part Code: S-HERC/AIRTUBE

Hercules 30

Steel baffle for Hercules boiler stoves. This part sits just below the lid of the stove behind the large horizontal tube. When discussing please specify your stove version.

Part Code 12B: S-HERC12B/BAF

Part Code 20B: S-HERC20B/BAF

Part Code 30b: S-HERC30B/BAF

Ceramic heat proof glass capable of withstanding temperatures up to 800°C. Over the years the glass has gone through several dimensional changes so please check your sizes and relevent part code before ordering.

Part Codes

185mm x 250mm: S-HERC/GLASS
187mm x 253mm: S-HERC/GLASS/D
192mm x 257mm: S-HERC/GLASS/W

Cast iron grate set for the Hercules stoves, these grates are supplied in two peices (left and right). When discussing please specify your stove version e.g. 12, 20 or 30.

Part Code 12BW – W585mm x D244mm: S-HERC12GRATE

Part Code 20B – W585mm x D314mm: S-HERC20GRATE

Part Code 30BW – W590mm x D396mm: S-HERC30GRATE

Handle for the Hercules 20 / 30 stove.

Part Code: S-HERC/HANDLE

Lid casting for the Hercules boiler stoves, please specify your version

Part Code 12B: S-HERC12/LID

Part Code 20B: S-HERC20/LID

Part Code 30B: S-HERC30/LID

Flue pipe reducer ring for the Hercules boiler stoves. This item sits into the lid and allows you to use 7″ flue rather than 8″.

Part Code: S-HERC/RED

Tertiary air tube for the Hercules boiler stoves. This is the perforated stainless tube which sits at the rear of the firebox, air enters the tube through the flap on the right hand side of the stove.

Part Code: S-HERC/AIRTUBE

Snowdon 26

????????????????????????????????

Part Code: ????

Bottom front vermiculite firebrick for the Snowdon 26 woodburning boiler stove

Part Code: S-EVO26/VERM/BOT/FR

Front side vermiculite firebrick for the Snowdon 26 woodburning boiler stove

Part Code: S-EVO26/VERM/SIDE/FR

Rear Bottom vermiculite firebrick for the Snowdon 26 woodburning boiler stove

Part Code: S-EVO26/VERM/BOT/REAR

Rear vermiculite firebrick for the Snowdon 26 woodburning boiler stove

Part Code: S-EVO26/VERMREAR

Rear side vermiculite firebrick for the Snowdon 26 woodburning boiler stove

Part Code: S-EVO26/VERM/SIDE/REAR

Ceramic heat resistent glass for the Snowdon 26 woodburning boiler stove

Part Code: S-SNOW26/GLASS

Grate for the Snowdon 26 woodburning boiler stove.

Part Code: S-EVO/GRATE

Handle for the Snowson 26 woodburning boiler stove.

Part Code: S-SNOW26/HANDLE

Cast log retainer for the Snowdon 26 woodburning boiler stove.

Part Code: S-SNOW/LOGRET

Flue spigot (or collar) for the Snowson 26 woodburning boiler stove.

Part Code: S-EVO/SPIGOT

The thermostat consists of an arm and sealing pad, this automatically opens and closes to regulate the combustion air entering the appliance. The initial starting position of the arm (desired combustion level) is set by rotating the control knob at the front of the stove. The control knob connects to the thermostat via a flexi drive cable, should you need to replace this drive cable it is our part code: T-THERM/FLEXI/SAG.

Part Code: T-THERMOSTAT

This is the small control knob located below the ash lip of the stove, by turning this control you set the starting position for the thermostat (initial combustion level before it starts automatically opening and closing to regulate the combustion air). This control is held in place with a spring clip, should you need to replace the spring clip our product code is: S-EVO26/KNOB/SPRING

Part Code: S-EVO26/KNOB